REA PC-Scan LD4 Barcode Verification Systems

发布时间：2023-03-30 23:08

넶浏览量：0

The REA PC-Scan LD4 is a barcode verifier made in Germany which was developed in conformity with international standards. It is especially designed for measuring barcodes with highest precision.

The combination of state-of-the-art technology, process reliability and intuitive operation makes the REA PC-Scan LD4 globally unique in its class.

Final statements "Pass" or "Fail" are central display elements and enable an immediate result. The simultaneously displayed details allow for an immediate and exact barcode quality analysis.

With the REA PC-Scan LD4, you can find out precisely why the scan rates are low. The detailed evaluation results allow a lasting optimization of the code quality.

Product Details

Fully automatic contrast calibration before every scan

Integrated metric standard for precise width and length measurements

Constant lighting angle of 45° over the entire scan width of 133 mm or 220 mm

Laser illumination with a wave length of 670 nm

Constant sensor angle of 90° over the entire scan width constant measurement distance over the entire scan width

Contact-free measurement

Aperture 10 to 20 mil in combination with up to 220 mm measure width (exemplary configuration)

Hollow body measurement adaptor for barcodes on hollow bodies available

Two device variants available: 133 mm scan width and 220 mm scan width

Features

Measurement according to ISO/IEC 15416 or ANSI X3.182

Optional parameters in accordance with the respective barcode standards for optimal print process control

Multiple complete settings can be stored as profiles

Settings profiles can be imported and exported, settings can be cloned for multiple devices

Adjustment of desired minimum quality with automatic target/actual comparison

Auto discrimination of the most important barcode symbologies

Automatic code size and check digits monitoring

Multiple measurement with averaging from up to 10 single measurements

Verification and visualization of quiet zones with an extended area

Ratio monitoring for two bar width codes (e.g. Code 39, 2/5i)

Verification according to the GS1 General Specifications requirements

Support with evaluation of GS1-128 data structures

Verification reports can be displayed as GS1 report and printed

Multilingual verification reports and user interface

Technical Data

Measurement accuracy in conformity with ISO/IEC 15426-1

ARM9, 32 bit microprocessor, 32 MB RAM, 32 MB Flash ROM

Embedded Linux operating system

Red light with 670 nm semiconductor laser, laser protection class II

Lighting angle 45°, measurement angle 90

Aperture: 4, 6 to 8 mil (equals 0.1; 0.15; 0.2 mm) or 10 to 20 mil depending on measuring head

Measuring accuracy: +/-3 μm for average value; +/-6 μm for extreme values; +/-5 % for contrast measuring accuracy

5 control keys: on/off, Scan, Store (save), Print, Pos. (stationary measurement)

Connection: RJ45 Ethernet port for power supply and TCP/IP data transfer (DHCP, ZeroConfig or manual fixed IP setup)

Power supply: via supplied Power-Over-Ethernet power supply, prim. 110-240 V~

Power supply socket and power connection cable for EU, US, UK

Connection with 2 CAT5 network patch cables (2 x 3 m)

Maximum data cable length 100 m

User maintenance: device is self-adjusting. Regular verification tool monitoring and cleaning of calibration fields required. Manufacturer service recommended every 2 years

Dimensions (W x H x D): 281 x 89 x 92 mm or 381 x 89 x 92 mm

Weight: 1,580 g or 1,820 g

Supplied evaluation software REA TransWin 32 - for PCs with MS® Windows 7, 8.1 or 10 operating systems and .net Framework, vers. 4.0 or later (64 bit preferred)

Symbologies

EAN-13

UPC-A

UPC-E with/without ADD-ON

EAN-8, 2/5 Interleaved with/without check digit

ITF-14

Code 39 with/without check digit

PZN-Code

Code 32

Code 128

GS1-128 with/without content verification

GS1-Databar (limited, expanded, stacked)